With Kubota engines, DPF problems are really common. They cost you a lot of money and time to dealing with this issues. We understand that it can be annoying to deal with DPF problems such as pending faults, stucked DPF, bad diesel faults, or uncomplated regenerations. And also we know even there is not a physical damage or clogging with your DPF, with Kubota engines there can be fault codes appeared in your DPF's or you can be stranded.
With our device for all Kubota engines, “CAN-BUS Kubota DTC Eraser & Soot Level Resetter" you can easily fix all this problems and save your time and money.
As our "CAN-BUS Kubota DTC Eraser & Soot Level Resetter" is a plug&play device, it is easy to use and no learning required
After using our device you will not have software based DPF issues.
All Kubota powered vehicles with DPF supported by our DTC Eraser & Soot Level Resetter.
How to use this device?
1-The ignition is switched on (but the truck will not working)
2-DTC Eraser plug into the OBD socket.
3-Wait 30 seconds (while the device is in the socket)
4-The ignition is switched Off
5-DTC Eraser plug get out the OBD socket.
6-Wait 30 seconds.
7-You can run the engine.
All faults will be cleared. If the error is still there, repeat the process.
If your DPF has physical damage or you are having problems with DPF temperature sensors or DPF differential pressure sensor and you do not want to pay exorbitant prices you can use our "CAN-BUS DPF Emulator". With our DPF Emulator your all DPF system can simulated properly and you won't have any fault codes appeared.
Click the link below to buy our "CAN-BUS DPF Emulator"
https://www.canbusemulator.com/en/dpf-emulators/kubota-dpf-emulator
Engines that you can use this device with:
Kubota Machines that you can use this device with:
Tractors:
Skidsteers:
Excavators:
Внимание! Използването на устройството за анулиране на Adblue е незаконно в някои страни и особено в страните от ЕС. Използването на това устройство ще доведе до високи емисии на отработени газове. След като започнете да използвате емулатора за анулиране на Adblue превозното Ви средство няма да отговаря на стандартите Euro4, Euro5 и Euro6. Устройството ни е предназначено за страните, където няма закон за спазване на екологичните стандарти Euro 4/5/6 . Емулаторът за анулиране на Adblue спира потока на течността DEF в катализатора SCR. Емулаторът за анулиране на Adblue е предназначен за използване в страните, където не са задължителни стандартите Euro 4/5/6 или за временно използване докато се изправят неизправностите, произтичащи от системата Adblue. Закупуването на прибора е напълно Ваше лично решение. Компанията ни не носи отговорност за всички правни проблеми, произтичащи от Вашето решение.
Sail Tech Ltd Adblue Removal Emulator
Обикновено отговаря в рамките на един часHow can i help you?