The kubota engine, used in Kubota Motor Vehicles, uses adblue fluid in some of its models. Some models only have a DPF filter. For vehicles with only a DPF filter and not using adblue fluid, the error rate is higher because the DPF filter fills up faster than vehicles with adblue fluid. For this reason, the Kubota DPF Emulator developed for minimizing the error rate in kubota vehicles that use only DPF filter that does not use adblue fluid will work without any problems. On these vehicles with Kubota DPF differential pressure sensor, the DPF filter will fill the DPF filter, and the DPF differential pressure sensor will immediately detect this situation and transmit the correct data to the engine control unit. In line with this information, the engine control unit reflects the warning to do DPF cleaning of the vehicle within a certain time frame on the vehicle screen. Users should do DPF filter cleaning in line with this information and delete the fault by connecting to the vehicle engine control unit with the vehicle fault detection device.
So is it easy to montage the Emulator?
DPF emulator montage is very easy on Kubota vehicles. The reason it is easy is that the appropriate documentation information is provided directly by the seller. There are exactly 11 cables in the Kubota DPF emulator. 2 of them are thin green cable, these cables must be connected to the temperature sensor of the filter used for the filter before the DOC filter, that is, the DPF filter. Then there are 2 thin yellow cables, which will be connected to the input temperature sensor of the DPF filter. There are 2 blue thin cables, these cables will be connected to the output temperature sensor of DPF Filter. But the most important thing to remember is that these assemblies will be made on the vehicle side and the sensors will be left idle. Then the white cable should be connected to the 3rd pin of the DPF differential pressure sensor. For the connection of the Kubota DPF emulator, the connection of the exhaust system is complete, and only CAN lines and power cables from our emulator will be connected at the front. The important thing is that the red cable of the emulator must be the contact line.
With the Kubota DPF emulator, kubota vehicles are provided with a fast solution without errors and costs. Eliminates torque limitation and time issues with the Kubota DPF Emulator. Compatible models of Kubota DPF emulator: The Kubota DPF emulator is compatible with all Kubota engine and no adblue liquid models.
Attention!: using adblue remove emulator is illegal in specially EN countries.Using this device causes elevated exhaus gas emission. When you started use adblue remove emulator, your truck doesnt comply with the euro4, euro5 and euro6 standards. Our device for countries that havent euro 4/5/6 ecologic rules. Adblue remove emulator, stoped the DEF liquid flowing in scr system. Adblue remove emulator sell for countries that havent adblue liquid and use for during the remove faults in adblue systems. This is a personal decision to buy this device. Our company doesnt resposible in any legal problems that groves with this decision.
Sail Tech Ltd Adblue Removal Emulator
Typically replies within an hourHow can i help you?
hi you can use this emulator for your kubota https://www.canbusemulator.com/en/construction-machines-adblue-scr-emulator/kubota-adblue-scr-emulator
your kubota is only DPF or SCR+DPF ??
hello john yes you can use my emulator for your kuboto. similation dpf system price is 199 usd free shipping with DHL you can check this link https://www.canbusemulator.com/en/dpf-emulators/kubota-dpf-emulator